全自動模切排廢機

飛達給紙部 Sheet Feed Section
       高速送紙飛達頭主要零部件全部為(wei) 進口，國內(nei) 組裝；配備飛達頭快速調整裝置，可根據紙張情況自由調飛達頭
的前、後、高、低，能更好的保證從(cong) 薄紙到大克數的卡紙、瓦楞紙平穩送紙。

       采用四吸四送強力吸紙飛達，吸頭可配合紙張的變形狀況調整各種吸紙角度；兩(liang) 側(ce) 配有吹氣裝置，方便紙張分離，保證顧暢走紙。
       配置三道飛達頭防撞保護裝置，安全可靠。

清廢部 Stripping Section
       兩(liang) 框聯動清廢裝置，動作協調，精度準確。
       清廢框采用上、中、下三框結構，可抽拉框裝版，使清廢部調整更方便、安全。
       采用電動控製提升混陽裝置，操作方便快捷。
Sheet Feed Section

      The main parts of the high-speed paper feeder are all imported and assembled domestically.
       Fast adjusting device for standby flying head, which can freely adjust flying head according to paper condition
       Front, rear, high and low, can better guarantee cards from thin paper to large grams.
       Paper and corrugated paper are sent smoothly.
      Four suction, four feeding and strong paper suction are adopted. The suction head can match the deformed shape of the paper.
      Various paper suction angles are adjusted; air blowing devices are installed on both sides to facilitate paper separation.
     Leave, guaranteeing that Gu Chang walks the paper.
     It is equipped with three anti-collision protection devices for flying head, which is safe and reliable.
Stripping Section

     Two-frame linkage scrap removal device, coordinated action, accurate.
     The scrap removal frame adopts three frame structures: upper, middle and lower, which can be pulled and packed to  make the scrap removal clear.
     Waste adjustment is more convenient and safe.
     It adopts electric control lifting mixing device, which is convenient and fast to operate.